Macros
#define	__HAL_TIM_RESET_HANDLE_STATE(__HANDLE__)
	Reset TIM handle state.

#define	__HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1\|=(TIM_CR1_CEN))
	Enable the TIM peripheral.

#define	__HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR\|=(TIM_BDTR_MOE))
	Enable the TIM main Output.

#define	__HAL_TIM_DISABLE(__HANDLE__)
	Disable the TIM peripheral.

#define	__HAL_TIM_MOE_DISABLE(__HANDLE__)
	Disable the TIM main Output.

#define	__HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)
	Disable the TIM main Output.

#define	__HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER \|= (__INTERRUPT__))
	Enable the specified TIM interrupt.

#define	__HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
	Disable the specified TIM interrupt.

#define	__HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER \|= (__DMA__))
	Enable the specified DMA request.

#define	__HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
	Disable the specified DMA request.

#define	__HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
	Check whether the specified TIM interrupt flag is set or not.

#define	__HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
	Clear the specified TIM interrupt flag.

#define	__HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)
	Check whether the specified TIM interrupt source is enabled or not.

#define	__HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
	Clear the TIM interrupt pending bits.

#define	__HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
	Indicates whether or not the TIM Counter is used as downcounter.

#define	__HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
	Set the TIM Prescaler on runtime.

#define	__HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
	Set the TIM Counter Register value on runtime.

#define	__HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
	Get the TIM Counter Register value on runtime.

#define	__HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__)
	Set the TIM Autoreload Register value on runtime without calling another time any Init function.

#define	__HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
	Get the TIM Autoreload Register value on runtime.

#define	__HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__)
	Set the TIM Clock Division value on runtime without calling another time any Init function.

#define	__HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
	Get the TIM Clock Division value on runtime.

#define	__HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__)
	Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.

#define	__HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__)
	Get the TIM Input Capture prescaler on runtime.

#define	__HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__)
	Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.

#define	__HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__)
	Get the TIM Capture Compare Register value on runtime.

#define	__HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__)
	Set the TIM Output compare preload.

#define	__HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__)
	Reset the TIM Output compare preload.

#define	__HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__)
	Enable fast mode for a given channel.

#define	__HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__)
	Disable fast mode for a given channel.

#define	__HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1\|= TIM_CR1_URS)
	Set the Update Request Source (URS) bit of the TIMx_CR1 register.

#define	__HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)
	Reset the Update Request Source (URS) bit of the TIMx_CR1 register.

#define	__HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)
	Set the TIM Capture x input polarity on runtime.

#define	__HAL_TIM_SELECT_CCDMAREQUEST(__HANDLE__, __CCDMA__) MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__))
	Select the Capture/compare DMA request source.

Detailed Description

Macro Definition Documentation

◆ __HAL_TIM_CLEAR_FLAG

#define __HAL_TIM_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)	((__HANDLE__)->Instance->SR = ~(__FLAG__))

Clear the specified TIM interrupt flag.

Parameters

__HANDLE__ specifies the TIM Handle.

__FLAG__

specifies the TIM interrupt flag to clear. This parameter can be one of the following values:

TIM_FLAG_UPDATE: Update interrupt flag
TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
TIM_FLAG_CC5: Capture/Compare 5 interrupt flag (*)
TIM_FLAG_CC5: Capture/Compare 6 interrupt flag (*)
TIM_FLAG_COM: Commutation interrupt flag
TIM_FLAG_TRIGGER: Trigger interrupt flag
TIM_FLAG_BREAK: Break interrupt flag
TIM_FLAG_BREAK2: Break 2 interrupt flag (*)
TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag (*) Value not defined for all devices

Return values

The	new state of FLAG (TRUE or FALSE).

◆ __HAL_TIM_CLEAR_IT

#define __HAL_TIM_CLEAR_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))

Clear the TIM interrupt pending bits.

Parameters

__HANDLE__	TIM handle
__INTERRUPT__	specifies the interrupt pending bit to clear. This parameter can be one of the following values: TIM_IT_UPDATE: Update interrupt TIM_IT_CC1: Capture/Compare 1 interrupt TIM_IT_CC2: Capture/Compare 2 interrupt TIM_IT_CC3: Capture/Compare 3 interrupt TIM_IT_CC4: Capture/Compare 4 interrupt TIM_IT_COM: Commutation interrupt TIM_IT_TRIGGER: Trigger interrupt TIM_IT_BREAK: Break interrupt

Return values

None

◆ __HAL_TIM_DISABLE

#define __HAL_TIM_DISABLE ( __HANDLE__ )

Value:

  do { \
    if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
    { \
      if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
      { \
        (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
      } \
    } \
  } while(0)

Disable the TIM peripheral.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_TIM_DISABLE_DMA

#define __HAL_TIM_DISABLE_DMA	(	__HANDLE__,
		__DMA__
	)	((__HANDLE__)->Instance->DIER &= ~(__DMA__))

Disable the specified DMA request.

Parameters

__HANDLE__	specifies the TIM Handle.
__DMA__	specifies the TIM DMA request to disable. This parameter can be one of the following values: TIM_DMA_UPDATE: Update DMA request TIM_DMA_CC1: Capture/Compare 1 DMA request TIM_DMA_CC2: Capture/Compare 2 DMA request TIM_DMA_CC3: Capture/Compare 3 DMA request TIM_DMA_CC4: Capture/Compare 4 DMA request TIM_DMA_COM: Commutation DMA request TIM_DMA_TRIGGER: Trigger DMA request

Return values

None

◆ __HAL_TIM_DISABLE_IT

#define __HAL_TIM_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))

Disable the specified TIM interrupt.

Parameters

__HANDLE__	specifies the TIM Handle.
__INTERRUPT__	specifies the TIM interrupt source to disable. This parameter can be one of the following values: TIM_IT_UPDATE: Update interrupt TIM_IT_CC1: Capture/Compare 1 interrupt TIM_IT_CC2: Capture/Compare 2 interrupt TIM_IT_CC3: Capture/Compare 3 interrupt TIM_IT_CC4: Capture/Compare 4 interrupt TIM_IT_COM: Commutation interrupt TIM_IT_TRIGGER: Trigger interrupt TIM_IT_BREAK: Break interrupt

Return values

None

◆ __HAL_TIM_DISABLE_OCxFAST

#define __HAL_TIM_DISABLE_OCxFAST	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\
   ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE))

Disable fast mode for a given channel.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected TIM_CHANNEL_5: TIM Channel 5 selected () TIM_CHANNEL_6: TIM Channel 6 selected () (*) Value not defined for all devices

Note: When fast mode is disabled CCx output behaves normally depending on counter and CCRx values even when the trigger is ON. The minimum delay to activate CCx output when an active edge occurs on the trigger input is 5 clock cycles.

Return values

None

◆ __HAL_TIM_DISABLE_OCxPRELOAD

#define __HAL_TIM_DISABLE_OCxPRELOAD	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\
   ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE))

Reset the TIM Output compare preload.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected TIM_CHANNEL_5: TIM Channel 5 selected () TIM_CHANNEL_6: TIM Channel 6 selected () (*) Value not defined for all devices

Return values

None

◆ __HAL_TIM_ENABLE

#define __HAL_TIM_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))

Enable the TIM peripheral.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_TIM_ENABLE_DMA

#define __HAL_TIM_ENABLE_DMA	(	__HANDLE__,
		__DMA__
	)	((__HANDLE__)->Instance->DIER \|= (__DMA__))

Enable the specified DMA request.

Parameters

__HANDLE__	specifies the TIM Handle.
__DMA__	specifies the TIM DMA request to enable. This parameter can be one of the following values: TIM_DMA_UPDATE: Update DMA request TIM_DMA_CC1: Capture/Compare 1 DMA request TIM_DMA_CC2: Capture/Compare 2 DMA request TIM_DMA_CC3: Capture/Compare 3 DMA request TIM_DMA_CC4: Capture/Compare 4 DMA request TIM_DMA_COM: Commutation DMA request TIM_DMA_TRIGGER: Trigger DMA request

Return values

None

◆ __HAL_TIM_ENABLE_IT

#define __HAL_TIM_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)	((__HANDLE__)->Instance->DIER \|= (__INTERRUPT__))

Enable the specified TIM interrupt.

Parameters

__HANDLE__	specifies the TIM Handle.
__INTERRUPT__	specifies the TIM interrupt source to enable. This parameter can be one of the following values: TIM_IT_UPDATE: Update interrupt TIM_IT_CC1: Capture/Compare 1 interrupt TIM_IT_CC2: Capture/Compare 2 interrupt TIM_IT_CC3: Capture/Compare 3 interrupt TIM_IT_CC4: Capture/Compare 4 interrupt TIM_IT_COM: Commutation interrupt TIM_IT_TRIGGER: Trigger interrupt TIM_IT_BREAK: Break interrupt

Return values

None

◆ __HAL_TIM_ENABLE_OCxFAST

#define __HAL_TIM_ENABLE_OCxFAST	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\
   ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE))

Enable fast mode for a given channel.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected TIM_CHANNEL_5: TIM Channel 5 selected () TIM_CHANNEL_6: TIM Channel 6 selected () (*) Value not defined for all devices

Note: When fast mode is enabled an active edge on the trigger input acts like a compare match on CCx output. Delay to sample the trigger input and to activate CCx output is reduced to 3 clock cycles.; Fast mode acts only if the channel is configured in PWM1 or PWM2 mode.

Return values

None

◆ __HAL_TIM_ENABLE_OCxPRELOAD

#define __HAL_TIM_ENABLE_OCxPRELOAD	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\
   ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE))

Set the TIM Output compare preload.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected TIM_CHANNEL_5: TIM Channel 5 selected () TIM_CHANNEL_6: TIM Channel 6 selected () (*) Value not defined for all devices

Return values

None

◆ __HAL_TIM_GET_AUTORELOAD

#define __HAL_TIM_GET_AUTORELOAD ( __HANDLE__ ) ((__HANDLE__)->Instance->ARR)

Get the TIM Autoreload Register value on runtime.

Parameters

__HANDLE__ TIM handle.

Return values

16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR)

◆ __HAL_TIM_GET_CLOCKDIVISION

#define __HAL_TIM_GET_CLOCKDIVISION ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)

Get the TIM Clock Division value on runtime.

Parameters

__HANDLE__ TIM handle.

Return values

The	clock division can be one of the following values: TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT TIM_CLOCKDIVISION_DIV2: tDTS=2tCK_INT TIM_CLOCKDIVISION_DIV4: tDTS=4tCK_INT

◆ __HAL_TIM_GET_COMPARE

#define __HAL_TIM_GET_COMPARE	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
   ((__HANDLE__)->Instance->CCR4))

Get the TIM Capture Compare Register value on runtime.

Parameters

__HANDLE__ TIM handle.

__CHANNEL__

TIM Channel associated with the capture compare register This parameter can be one of the following values:

TIM_CHANNEL_1: get capture/compare 1 register value
TIM_CHANNEL_2: get capture/compare 2 register value
TIM_CHANNEL_3: get capture/compare 3 register value
TIM_CHANNEL_4: get capture/compare 4 register value
TIM_CHANNEL_5: get capture/compare 5 register value (*)
TIM_CHANNEL_6: get capture/compare 6 register value (*) (*) Value not defined for all devices

Return values

16-bit or 32-bit value of the capture/compare register (TIMx_CCRy)

◆ __HAL_TIM_GET_COUNTER

#define __HAL_TIM_GET_COUNTER ( __HANDLE__ ) ((__HANDLE__)->Instance->CNT)

Get the TIM Counter Register value on runtime.

Parameters

__HANDLE__ TIM handle.

Return values

16-bit or 32-bit value of the timer counter register (TIMx_CNT)

◆ __HAL_TIM_GET_FLAG

#define __HAL_TIM_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)	(((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))

Check whether the specified TIM interrupt flag is set or not.

Parameters

__HANDLE__ specifies the TIM Handle.

__FLAG__

specifies the TIM interrupt flag to check. This parameter can be one of the following values:

TIM_FLAG_UPDATE: Update interrupt flag
TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
TIM_FLAG_CC5: Capture/Compare 5 interrupt flag (*)
TIM_FLAG_CC5: Capture/Compare 6 interrupt flag (*)
TIM_FLAG_COM: Commutation interrupt flag
TIM_FLAG_TRIGGER: Trigger interrupt flag
TIM_FLAG_BREAK: Break interrupt flag
TIM_FLAG_BREAK2: Break 2 interrupt flag (*)
TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag (*) Value not defined for all devices

Return values

The	new state of FLAG (TRUE or FALSE).

◆ __HAL_TIM_GET_ICPRESCALER

#define __HAL_TIM_GET_ICPRESCALER	(	__HANDLE__,
		__CHANNEL__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
   (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U)

Get the TIM Input Capture prescaler on runtime.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: get input capture 1 prescaler value TIM_CHANNEL_2: get input capture 2 prescaler value TIM_CHANNEL_3: get input capture 3 prescaler value TIM_CHANNEL_4: get input capture 4 prescaler value

Return values

The	input capture prescaler can be one of the following values: TIM_ICPSC_DIV1: no prescaler TIM_ICPSC_DIV2: capture is done once every 2 events TIM_ICPSC_DIV4: capture is done once every 4 events TIM_ICPSC_DIV8: capture is done once every 8 events

◆ __HAL_TIM_GET_IT_SOURCE

#define __HAL_TIM_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \

== (__INTERRUPT__)) ? SET : RESET)

RESET

@ RESET

Definition: stm32f3xx.h:165

SET

@ SET

Definition: stm32f3xx.h:166

Check whether the specified TIM interrupt source is enabled or not.

Parameters

__HANDLE__	TIM handle
__INTERRUPT__	specifies the TIM interrupt source to check. This parameter can be one of the following values: TIM_IT_UPDATE: Update interrupt TIM_IT_CC1: Capture/Compare 1 interrupt TIM_IT_CC2: Capture/Compare 2 interrupt TIM_IT_CC3: Capture/Compare 3 interrupt TIM_IT_CC4: Capture/Compare 4 interrupt TIM_IT_COM: Commutation interrupt TIM_IT_TRIGGER: Trigger interrupt TIM_IT_BREAK: Break interrupt

Return values

The	state of TIM_IT (SET or RESET).

◆ __HAL_TIM_IS_TIM_COUNTING_DOWN

#define __HAL_TIM_IS_TIM_COUNTING_DOWN ( __HANDLE__ ) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))

Indicates whether or not the TIM Counter is used as downcounter.

Parameters

__HANDLE__ TIM handle.

Return values

False (Counter used as upcounter) or True (Counter used as downcounter)

Note: This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder mode.

◆ __HAL_TIM_MOE_DISABLE

#define __HAL_TIM_MOE_DISABLE ( __HANDLE__ )

Value:

  do { \
    if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \
    { \
      if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \
      { \
        (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
      } \
    } \
  } while(0)

Disable the TIM main Output.

Parameters

__HANDLE__ TIM handle

Return values

None

Note: The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled

◆ __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY

#define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY ( __HANDLE__ ) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE)

Disable the TIM main Output.

Parameters

__HANDLE__ TIM handle

Return values

None

Note: The Main Output Enable of a timer instance is disabled unconditionally

◆ __HAL_TIM_MOE_ENABLE

#define __HAL_TIM_MOE_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))

Enable the TIM main Output.

Parameters

__HANDLE__ TIM handle

Return values

None

◆ __HAL_TIM_RESET_HANDLE_STATE

#define __HAL_TIM_RESET_HANDLE_STATE ( __HANDLE__ )

Value:

                                                      do {                                                               \
                                                      (__HANDLE__)->State            = HAL_TIM_STATE_RESET;         \
                                                      (__HANDLE__)->ChannelState[0]  = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelState[1]  = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelState[2]  = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelState[3]  = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelState[4]  = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelState[5]  = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \
                                                      (__HANDLE__)->DMABurstState    = HAL_DMA_BURST_STATE_RESET;   \
                                                     } while(0)

Reset TIM handle state.

Parameters

__HANDLE__ TIM handle.

Return values

None

◆ __HAL_TIM_SELECT_CCDMAREQUEST

#define __HAL_TIM_SELECT_CCDMAREQUEST	(	__HANDLE__,
		__CCDMA__
	)	MODIFY_REG((__HANDLE__)->Instance->CR2, TIM_CR2_CCDS, (__CCDMA__))

Select the Capture/compare DMA request source.

Parameters

__HANDLE__	specifies the TIM Handle.
__CCDMA__	specifies Capture/compare DMA request source This parameter can be one of the following values: TIM_CCDMAREQUEST_CC: CCx DMA request generated on Capture/Compare event TIM_CCDMAREQUEST_UPDATE: CCx DMA request generated on Update event

Return values

None

◆ __HAL_TIM_SET_AUTORELOAD

#define __HAL_TIM_SET_AUTORELOAD	(	__HANDLE__,
		__AUTORELOAD__
	)

Value:

  do{                                                    \
    (__HANDLE__)->Instance->ARR = (__AUTORELOAD__);  \
    (__HANDLE__)->Init.Period = (__AUTORELOAD__);    \
  } while(0)

Set the TIM Autoreload Register value on runtime without calling another time any Init function.

Parameters

__HANDLE__	TIM handle.
__AUTORELOAD__	specifies the Counter register new value.

Return values

None

◆ __HAL_TIM_SET_CAPTUREPOLARITY

#define __HAL_TIM_SET_CAPTUREPOLARITY	(	__HANDLE__,
		__CHANNEL__,
		__POLARITY__
	)

Value:

  do{                                                                     \
    TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__));               \
    TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
  }while(0)

Set the TIM Capture x input polarity on runtime.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected
__POLARITY__	Polarity for TIx source TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge

Return values

None

◆ __HAL_TIM_SET_CLOCKDIVISION

#define __HAL_TIM_SET_CLOCKDIVISION	(	__HANDLE__,
		__CKD__
	)

Value:

  do{                                                   \
    (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD);  \
    (__HANDLE__)->Instance->CR1 |= (__CKD__);       \
    (__HANDLE__)->Init.ClockDivision = (__CKD__);   \
  } while(0)

Set the TIM Clock Division value on runtime without calling another time any Init function.

Parameters

__HANDLE__	TIM handle.
__CKD__	specifies the clock division value. This parameter can be one of the following value: TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT TIM_CLOCKDIVISION_DIV2: tDTS=2tCK_INT TIM_CLOCKDIVISION_DIV4: tDTS=4tCK_INT

Return values

None

◆ __HAL_TIM_SET_COMPARE

#define __HAL_TIM_SET_COMPARE	(	__HANDLE__,
		__CHANNEL__,
		__COMPARE__
	)

Value:

  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
   ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)))

Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected TIM_CHANNEL_5: TIM Channel 5 selected () TIM_CHANNEL_6: TIM Channel 6 selected () (*) Value not defined for all devices
__COMPARE__	specifies the Capture Compare register new value.

Return values

None

◆ __HAL_TIM_SET_COUNTER

#define __HAL_TIM_SET_COUNTER	(	__HANDLE__,
		__COUNTER__
	)	((__HANDLE__)->Instance->CNT = (__COUNTER__))

Set the TIM Counter Register value on runtime.

Note Please check if the bit 31 of CNT register is used as UIF copy or not, this may affect the counter range in case of 32 bits counter TIM instance. Bit 31 of CNT can be enabled/disabled using __HAL_TIM_UIFREMAP_ENABLE()/__HAL_TIM_UIFREMAP_DISABLE() macros.

Parameters

__HANDLE__	TIM handle.
__COUNTER__	specifies the Counter register new value.

Return values

None

◆ __HAL_TIM_SET_ICPRESCALER

#define __HAL_TIM_SET_ICPRESCALER	(	__HANDLE__,
		__CHANNEL__,
		__ICPSC__
	)

Value:

  do{                                                    \
    TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__));  \
    TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
  } while(0)

Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() function.

Parameters

__HANDLE__	TIM handle.
__CHANNEL__	TIM Channels to be configured. This parameter can be one of the following values: TIM_CHANNEL_1: TIM Channel 1 selected TIM_CHANNEL_2: TIM Channel 2 selected TIM_CHANNEL_3: TIM Channel 3 selected TIM_CHANNEL_4: TIM Channel 4 selected
__ICPSC__	specifies the Input Capture4 prescaler new value. This parameter can be one of the following values: TIM_ICPSC_DIV1: no prescaler TIM_ICPSC_DIV2: capture is done once every 2 events TIM_ICPSC_DIV4: capture is done once every 4 events TIM_ICPSC_DIV8: capture is done once every 8 events

Return values

None

◆ __HAL_TIM_SET_PRESCALER

#define __HAL_TIM_SET_PRESCALER	(	__HANDLE__,
		__PRESC__
	)	((__HANDLE__)->Instance->PSC = (__PRESC__))

Set the TIM Prescaler on runtime.

Parameters

__HANDLE__	TIM handle.
__PRESC__	specifies the Prescaler new value.

Return values

None

◆ __HAL_TIM_URS_DISABLE

#define __HAL_TIM_URS_DISABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS)

Reset the Update Request Source (URS) bit of the TIMx_CR1 register.

Parameters

__HANDLE__ TIM handle.

Note: When the URS bit of the TIMx_CR1 register is reset, any of the following events generate an update interrupt or DMA request (if enabled): _ Counter overflow underflow _ Setting the UG bit _ Update generation through the slave mode controller

Return values

None

◆ __HAL_TIM_URS_ENABLE

#define __HAL_TIM_URS_ENABLE ( __HANDLE__ ) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS)

Set the Update Request Source (URS) bit of the TIMx_CR1 register.

Parameters

__HANDLE__ TIM handle.

Note: When the URS bit of the TIMx_CR1 register is set, only counter overflow/underflow generates an update interrupt or DMA request (if enabled)

Return values

None

Macros

Detailed Description

Macro Definition Documentation

◆ __HAL_TIM_CLEAR_FLAG

◆ __HAL_TIM_CLEAR_IT

◆ __HAL_TIM_DISABLE

◆ __HAL_TIM_DISABLE_DMA

◆ __HAL_TIM_DISABLE_IT

◆ __HAL_TIM_DISABLE_OCxFAST

◆ __HAL_TIM_DISABLE_OCxPRELOAD

◆ __HAL_TIM_ENABLE

◆ __HAL_TIM_ENABLE_DMA

◆ __HAL_TIM_ENABLE_IT

◆ __HAL_TIM_ENABLE_OCxFAST

◆ __HAL_TIM_ENABLE_OCxPRELOAD

◆ __HAL_TIM_GET_AUTORELOAD

◆ __HAL_TIM_GET_CLOCKDIVISION

◆ __HAL_TIM_GET_COMPARE

◆ __HAL_TIM_GET_COUNTER

◆ __HAL_TIM_GET_FLAG

◆ __HAL_TIM_GET_ICPRESCALER

◆ __HAL_TIM_GET_IT_SOURCE

◆ __HAL_TIM_IS_TIM_COUNTING_DOWN

◆ __HAL_TIM_MOE_DISABLE

◆ __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY

◆ __HAL_TIM_MOE_ENABLE

◆ __HAL_TIM_RESET_HANDLE_STATE

◆ __HAL_TIM_SELECT_CCDMAREQUEST

◆ __HAL_TIM_SET_AUTORELOAD

◆ __HAL_TIM_SET_CAPTUREPOLARITY

◆ __HAL_TIM_SET_CLOCKDIVISION

◆ __HAL_TIM_SET_COMPARE

◆ __HAL_TIM_SET_COUNTER

◆ __HAL_TIM_SET_ICPRESCALER

◆ __HAL_TIM_SET_PRESCALER

◆ __HAL_TIM_URS_DISABLE

◆ __HAL_TIM_URS_ENABLE